LOCKSTITCH MACHINES

JACK JK-58720B Lockstitch Machines

The JACK JK-58720B is a 2-needle lockstitch machine with a double serger-needle feed without disengageable needles with a large shank. Depending on the specific subclass of the machine, it can work on light and medium materials (subclass 003), as well as on heavy materials (subclass 005). The JACK 58720B is an industrial machine currently one of the most modern in the range, with a very intuitive operating panel for setting sewing parameters. Through the panel it is possible to easily manage the automatic functions in the lockstitch machine. We can distinguish here, among others, needle positioning, thread cutting, foot lifting (7-13 mm), as well as locking at the beginning and at the end of the stitch. The machine is available with an energy-saving SERVO sewing machine motor, which only runs when the machine is in use. This guarantees lower power consumption. In addition, thanks to the use of the so-called Direct Drive, i.e. the location of the motor in the machine head, the machine is faultless and eliminates unwanted vibrations and oscillations. Closed lubrication system (no typical oil sump) - a small amount of oil is contained in a closed tank. Such a solution guarantees lower oil consumption, better lubrication of the machine mechanisms and protects against staining the fabric during sewing.

LED backlighting with 3-stage adjustment is also standard.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JACK  JK58450B Lockstitch Machines

JACK JK-58450B is a 2-needle lockstitch machine with a double serger-needle transport and needle bar disengagement. Depending on the specific subclass of the machine, it can work on light and medium materials (subclass 003), as well as on heavy materials (subclass 005). The JACK JK-58450B is an industrial machine currently one of the most modern in the range, with a very intuitive operating panel for setting sewing parameters. Through the panel it is possible to easily manage the automatic functions in the lockstitch machine. We can distinguish here, among others, needle positioning, thread cutting, foot lifting (7-13 mm), as well as locking at the beginning and at the end of the stitch. The machine is available with an energy-saving SERVO sewing machine motor, which only runs when the machine is in use. This guarantees lower power consumption. In addition, thanks to the use of the so-called Direct Drive, i.e. the location of the motor in the machine head, the machine is faultless and eliminates unwanted vibrations and oscillations. Closed lubrication system (no typical oil sump) - a small amount of oil is contained in a closed tank. This solution guarantees lower oil consumption, better lubrication of the machine mechanisms and protects against staining of the fabric during sewing.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JACK JK-58420B Lockstitch Machines

JACK JK-58420B is a 2-needle lockstitch machine with a double serger-needle feed. Depending on the specific subclass of the machine, it can work on light and medium materials (subclass 403), as well as on heavy materials (subclass 405). The JACK JK-58420 is an industrial machine currently one of the most modern in the range, with a very intuitive operating panel for setting sewing parameters. Through the panel, the automatic functions of the lockstitch machine can be easily managed. We can distinguish here, among others, needle positioning, thread cutting, foot lifting (7-13 mm), as well as locking at the beginning and at the end of the stitch. The machine is available with an energy-saving SERVO sewing machine motor, which only runs when the machine is in use. This guarantees lower power consumption. In addition, thanks to the use of the so-called Direct Drive, i.e. the location of the motor in the machine head, the machine is faultless and eliminates unwanted vibrations and oscillations. What's more, the machine with such a mounted motor works quieter, but also more efficiently - it has more power, starts sewing quickly and also makes less noise, thus contributing to the comfort of working with the machine.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI MP-200NL Lockstitch Machines

JUKI MP-200NL is a lockstitch machine for decorative stitching. A 2-needle, 1-thread machine that creates a decorative stitch that imitates hand stitching on the lower side of the sewn fabric (chain stitch pattern visible on the upper side). Length of visible decorative stitching: 3.0; 4.0; 5.0 mm (standard). The distance between stitches is adjustable from 3.5 - 10 mm. The machine can work at a speed of up to 1,500 stitches/min).

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand JUKI !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI MP-200NS Lockstitch Machines

JUKI MP-200NS is a lockstitch machine for decorative stitching. A 2-needle, 1-thread machine that creates a decorative stitch that imitates hand stitching on the bottom side of the sewn fabric (chain stitch pattern visible on the top side). Length of visible decorative stitching: 1.2; 1.6 (standard); 2.0 mm. The distance between stitches is adjustable from 3.5 - 10 mm. The machine can work at a speed of up to 2000 stitches/min).

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand JUKI !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI LH-4588CFG7NB SC956BN Lockstitch Machines

JUKI LH-4588CFG7NB SC956BN is a 2-needle, large-gauge lockstitch machine that is fully digital and automatic with needle shut-off. Seam quality is improved by introducing separately driven right and left active tensioning mechanisms. The thread tension is automatically corrected according to the sewing speed. In this way, consistent seam quality is achieved regardless of changes in sewing speed. The needle thread tension is automatically corrected according to the remaining amount of bottom thread. This ensures that the seam quality is stable even if the amount of remaining bottom thread decreases. With the active foot, the foot pressure can now be corrected according to the sewing speed. Multilayer portion detection device (for G subclass only). Equipped with this device, it detects multilayer overlays. This device contributes to a stable stroke, a well-tensioned seam when sewing a multilayer portion. Since the sewing correction can be set for the multilayer part, the reaching part and the upper multilayer part respectively, the stitch crease in the multilayer part can be improved. The ability to stitch corners has been improved (only for LH-4588C). The transition from normal sewing to corner sewing is carried out semi-automatically via a lever, while ensuring ease of operation. 

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI LH-4578CFG7NB SC956BN Lockstitch Machines

The JUKI LH-4578CFG7NB SC956BN is a 2-needle large shank lockstitch machine that is fully digital and automatic. Seam quality is improved by introducing separately driven right and left active tensioning mechanisms. The thread tension is automatically corrected depending on the sewing speed. In this way, consistent seam quality is achieved regardless of changes in sewing speed. The needle thread tension is automatically corrected according to the remaining amount of bottom thread. This ensures that the seam quality is stable even if the amount of remaining bottom thread decreases. With the active foot, the foot pressure can now be corrected according to the sewing speed. Multilayer portion detection device (for G subclass only). Equipped with this device, it detects multilayer overlays. This device contributes to a stable stroke, a well-tensioned seam when sewing a multilayer portion. Since the sewing correction can be set for the multilayer part, the reaching part and the upper multilayer part respectively, the stitch crease in the multilayer part can be improved.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI LH-4578CFFF SC956BN Lockstitch Machines

The JUKI LH-4578CFFF SC956BN is a 2-needle, large shank, no thread cutter fully digital lockstitch machine. Seam quality is improved by introducing separately driven right and left active tensioning mechanisms. The thread tension is automatically corrected depending on the sewing speed. In this way, consistent seam quality is achieved regardless of changes in sewing speed. The needle thread tension is automatically corrected according to the remaining amount of bottom thread. This ensures that the seam quality is stable even if the amount of remaining bottom thread decreases. With the active foot, the foot pressure can now be corrected according to the sewing speed. Multilayer portion detection device (for G subclass only). Equipped with this device, it detects multilayer overlays. This device contributes to a stable stroke/good seam tension when sewing a multilayer portion. Since the sewing correction can be set for the multilayer part, the reaching part and the upper multilayer part respectively, the stitch crease in the multilayer part can be improved.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI LH-3588AGF-7 Lockstitch Machines

JUKI LH-3588AGF-7 is a 2-needle lockstitch machine with large hooks with needles off. A machine from the new series of 2-needle lockstitch machines designed for sewing heavy materials. There is a completely revised design of the machine here compared to the previous version with a number of improvements and enhancements. The working area of the machine has been increased, thus improving the comfort of work when processing large parts, while maintaining the external dimensions of the machine bed. The machine is equipped with a modern lubrication system (no typical oil sump). Oil flows in a closed circuit and is only fed to the gripper mechanism. The oil escaping from the gripper area falls into the oil sump, from where it is returned to the closed circuit after passing through a filter. This solution guarantees the absence of any leakage of oil from the upper part of the machine (mainly the needle bar) causing fabric staining, while maintaining the high sewing speed as in the version with lubrication of all machine mechanisms.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI LH-3588AGF Lockstitch Machines

JUKI LH-3588AGF is a 2-needle lockstitch machine with large hooks with needles off. A machine from the new series of 2-needle lockstitch machines designed for sewing heavy materials. There is a completely revised design of the machine here compared to the previous version with a number of improvements and enhancements. The working area of the machine has been increased, thus improving the comfort of work when processing large parts, while maintaining the external dimensions of the machine bed. The machine is equipped with a modern lubrication system (no typical oil sump). Oil flows in a closed circuit and is only fed to the gripper mechanism. The oil escaping from the gripper area falls into the oil sump, from where it is returned to the closed circuit after passing through a filter. This solution guarantees the absence of any leakage of oil from the upper part of the machine (mainly the needle bar) causing fabric staining, while maintaining the high sewing speed as in the version with lubrication of all machine mechanisms.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI LH-3578AGF-7 Lockstitch Machines

JUKI LH-3578AGF-7 is a 2-needle lockstitch machine with large hooks and automation. The machine is designed for sewing heavy materials. The machine is equipped with a modern energy-saving SERVO motor (so-called Direct Drive) mounted in the head directly on the main shaft of the machine.  The machine has automatic functions, i.e. thread cutting, initial and final locking, needle positioning, foot lifting, thread wiper, as well as other functions of the control panel. The machine is also equipped with a new lubricating oil for the pick-up. Changed the construction of the machine in relation to the previous version with a number of improvements and enhancements. The working area of the machine has been increased. This improves working comfort when machining large workpieces, while maintaining the external dimensions of the machine bed. Available with a modern lubrication system as standard (no typical oil sump). Closed-circuit oil fed only to the gripper mechanism. The oil escaping from the gripper area falls into the oil sump, from where it is returned to the closed circuit after passing through a filter. This solution guarantees the absence of any leakage of oil from the upper part of the machine (mainly the needle bar) causing fabric staining, while maintaining the high sewing speed as in the version with lubrication of all machine mechanisms.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI LH-3578AGF Lockstitch Machines

The JUKI LH-3578AGF is a 2-needle machine without switchable needles with large grippers. The machine is designed for sewing heavy materials. Serrated-needle transport with quick changeover to bottom serrated The machine sews at a sewing speed of up to 3000 stitches/min. Standard 6.4 mm needle spacing. The machine is equipped with automatic functions, i.e. automatic thread cutting, needle positioning, foot lifting, programming of the number of start and end lock stitches, and a thread-wiper. Enlarged working area of the machine compared to the previous model, which is important when machining large workpieces. Modern lubrication system (S-Semi Dry), without the usual oil sump. Closed-circuit oil fed only to the gripper mechanism. The oil escaping from the gripper area into the oil sump, after passing through a filter, is returned to the closed circuit. This solution guarantees that there are no oil leaks from the upper part of the machine, causing soiling of the fabric, while maintaining high sewing speed. In addition, this solution guarantees that the oil lubricating the gripper is kept clean. Optional needle spacing available from 4.8 to 38.1 mm.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI LH-3568ASF-7 Lockstitch Machines

JUKI LH-3568ASF-7 is a 2-needle machine with automation and with needle shut-offs. The machine has a tooth and needle transport. The maximum sewing speed is up to 3000 stitches/min. The machine has a standard needle spacing of 6.4 mm. An energy-saving SERVO motor located directly in the machine head (so-called Direct Drive) is used here. The lockstitch machine has automatic functions, i.e. thread cutting, needle positioning, foot lifting (AK135), programming of start and end lock, thread wiper and micro reverse stitch switch. The CP180 control panel used is mounted on the machine head for easy access to machine parameters, including: programming of start and end locks before thread cutting, possibility of programming independent number of start and end locks, possibility of selecting single or double locks, programming of stitch length, counting the number of stitches between start and end locks. Revised machine design compared to the previous version with a number of improvements and enhancements. The working area of the machine has been increased, thus improving working comfort when machining large workpieces, while maintaining the external dimensions of the machine bed. Available with a modern lubrication system as standard (no typical oil sump). The oil flows in a closed circuit and only reaches the gripper mechanism. The oil escaping from the gripper area falls into the oil sump from where it is returned to the closed circuit after passing through a filter. This solution guarantees the absence of any oil leakage from the upper part of the machine (mainly the needle bar) causing fabric staining, while maintaining the high sewing speed as in the version with lubrication of all machine mechanisms. Optional version available without oil return.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI LH-3568ASF Lockstitch Machines

The JUKI LH-3568ASF is a 2-needle lockstitch machine with a semi-dry head and switchable needles. With the machine it is possible not only to sew straight, but also square. It definitely expands the possibilities of work to be performed with the help of this industrial lockstitch machine. The machine uses a double transport: bottom serging and top needle. The maximum sewing speed you will get is 3000 stitches per minute, which makes it a very efficient machine. The stitch length is 5 mm. The needle spacing is standard for two-needle machines and is 6.4 mm (F). The machine has symmetrical shanks of standard size. The machine foot can be raised to a height of 13 mm. The JUKI LH-3568ASF machine features JUKI's signature solution, a closed lubrication system. In the machine, the oil remains in a closed circuit (the machine does not have a typical oil sump). In addition, it is only supplied to the gripper mechanism and the connecting rods. The design, compared to previous versions of the JUKI twin-needle machine, has been completely revised. Although the dimensions of the lockstitch machine are identical to previous versions, the working field, for example, has been enlarged, thanks to which the comfort of using the machine has also increased.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI LH-3528ASF-7 Lockstitch Machines

JUKI LH-3528ASF-7 is a 2-needle lockstitch machine with automation. The machine without disengageable needles, tooth-needle transport with the possibility to quickly switch to bottom serging (new). The machine operates at a maximum sewing speed of up to 3000 stitches/min. Standard needle spacing of 6.4 mm. An energy-saving SERVO motor mounted directly in the machine head (i.e. Direct Drive) is used here. The lockstitch machine provides automatic functions: thread cutting, needle positioning, foot lift (AK135), start and end lock programming, thread wiper and micro reverse stitch switch. Equipped with CP180 control panel mounted on the machine head for easy access to set machine parameters, including: programming of start and end locks before thread cutting, possibility to program independent number of start and end locks, possibility to select single or double locks, programming of stitch length, counting the number of stitches between start and end locks.

Completely revised machine design compared to the previous version, with a number of improvements and enhancements. The working area of the machine has been increased, thus improving comfort when machining large workpieces, while maintaining the external dimensions of the machine bed. Available with a modern lubrication system as standard (no typical oil sump). Closed-circuit oil fed only to the gripper mechanism. Oil escaping from the gripper area falls into the oil sump from where it is returned to the closed circuit after passing through a filter. This solution guarantees the absence of any oil leakage from the upper part of the machine (mainly the needle bar) causing fabric staining, while maintaining the high sewing speed as in the version with lubrication of all machine mechanisms. Optional version available without oil return.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI LH-3528ASF Lockstitch Machines

JUKI LH-3528ASF is a 2-needle lockstitch machine without switchable needles. The machine has a serrated-needle transport with the option to quickly switch to bottom serging. The machine sews at a speed of up to 3,000 stitches/min and has a standard needle spacing of 6.4 mm. The design here has been revised from the previous version. A number of improvements and enhancements have been added. The working area of the machine has been increased, improving comfort when machining large workpieces, while maintaining the external dimensions of the machine bed. Available with a modern lubrication system as standard (no typical oil sump). Closed-circuit oil fed only to the gripper mechanism and connecting rods. A solution guaranteeing the absence of any oil leakage from the upper part of the machine (mainly the needle bar) causing fabric staining, while maintaining high sewing speed as in the version with lubrication of all machine mechanisms. Possibility of switching off the upper transport by easy adjustment and exchange of needle spacing elements (only in the LH-3528 model).

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI DMN-5420N 7 WB/AK/SC920/CP180 Lockstitch Machines

JUKI DMN-5420N 7 WB/AK/SC920/CP180 is a 1-needle lockstitch machine with serrated and needle bottom feed. The machine is equipped with a fabric peeler knife. It has a Direct Drive motor - guaranteeing both lower energy consumption and reliability and comfort of work. It is equipped with the following automatic functions: thread cutter, needle positioning, foot lift, start and end lock programming, thread ejector, micro reverse stitch switch, in addition to the functions of the CP-180 control panel.In the machine, the available spacing between the deburring knife and the needle is 3.2 (standard); 4.0; 4.8; 6.4; 9.5 mm. Maximum sewing speed up to 5000 stitches/min. Stitch length 5mm forward and 3mm backward. Foot lift height 10mm, maximum thickness of material to be trimmed 4mm.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI DLU-5490NBB 7 WB/AK85/PF6/SC920 Chainstitch Machine

1-needle machine with serrated bottom feed and differential top feed - automatic. Designed for sewing light and medium materials. This model is used, for example, where it is required to crease the upper layer of sewn materials. The machine is equipped with PF-6 tooling for differential top feed. The machine is equipped with an energy-saving SERVO Juki SC920 motor and the Juki CP-180 control panel. The machine has automatic functions, i.e. thread cutter, locking at the beginning and end of sewing, foot lifter, needle positioning, thread thrower, micro reverse stitch switch.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI DLU-5490NBB PF-6 Chainstitch Machine

The JUKI DLU-5490NBB PF-6 is a 1-needle lockstitch machine with bottom serging and top differential feed. The machine is designed for sewing light and medium materials. This model is used, for example, where the upper layer of sewn materials is required to be creased. The machine is equipped with PF-6 differential top feed. Optional attachments available: creasing support, for sewing in shirt necks, for folding and many others.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI DLD-5430N 7/WB/AK/SC920/CP180 Chainstitch Machine

The JUKI DLD-5430N 7/WB/AK/SC920/CP180 is a 1-needle lockstitch sewing machine. It has a bottom differential transport. The sewing speed is max. 4,500 stitches/min and stitch length up to 5 mm. Creasing: 1:1.5 (max. 1:3 for stitch lengths up to 2.5 mm), stretch: 1:0.5. The machine has central lubrication. The machine is equipped with an energy-saving SERVO M-92 motor, SC-920 control box providing automatic functions: thread cutting, needle positioning, foot lift, programming of start and end stitch size, thread ejector, micro reverse stitch switch. In addition, it has functions available from the CP-180 control panel. Possibility to mount the Q036 creasing tool.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI DLD-5430N Chainstitch Machine

JUKI DLD-5430N is a 1-needle lockstitch machine with differential bottom feed. The machine operates at a sewing speed of 4,500 stitches/min, stitch length up to 5 mm, creasing: 1:1.5 (max 1:3 for stitch length up to 2.5 mm), stretch: 1:0.5. The machine is equipped with central lubrication. It is possible to fit the Q036 creasing tool.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

Vibemac ONE-N (B1N) Chainstitch Machine

Vibemac ONE-N (B1N) Single needle lockstitch machine with needle feed. The machine is designed for sewing heavy materials. The needle feed mechanism prevents shifting of layers and creasing. The machine with the B1N designation is designed with a "semi-dry" oil lubrication system. It is possible to reverse the last stitch by reversing the sewing speed without manual operations. Thanks to the double bobbin capacity, downtime is drastically reduced and productivity is increased.

SERVO motor with direct drive: energy saving and less vibration. Programmable sewing operations: greater flexibility for every style and quality need. Automatic foot lifter: improved operator handling and productivity. Automatic thread cutter: higher productivity, clean cut and thread saving. Needle feed: prevents layer shifts and creasing, ensuring excellent sewing quality. Double capacity bobbin: half the bobbin changes, double the productivity. Additional foot lifter: greater flexibility for heavier fabrics and multiple layers. Menu in four languages: operator and technician friendly. Half stitch reverse button on the machine head: possibility to reverse the last stitch by reversing the sewing speed without manual operations.

Semi-dry oil system: precise lubrication only at the necessary points with significant oil savings. Integrated bobbin winder: improved operator handling and productivity. Integrated adjustable handle: improves operator comfort. Complete with sturdy table and base: high quality workmanship.

For clean and smooth sewing on both sides of denim and heavy fabrics (optional). Compensation foot: more operations and higher quality (optional).

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI DLN-9010ASS (H) AK141/SC920/CP180 Chainstitch Machine

JUKI DLN-9010ASS (H) AK141/SC920/CP180 it is the latest generation lockstitch machine, electronically controlled, equipped with a SERVO motor built into the machine head. Needle and tooth transport, sewing speed up to 5000 stitches/min with a stitch length of up to 3.5 mm, 4000 stitches/min with a stitch length of up to 4.5 mm; depending on the subclass: S - for sewing light and medium materials (standard), H - for heavy materials (max. 4000 stitches/min).

The machine has automatic functions: thread trimming, needle positioning, presser foot lifting, the ability to program the size of the initial and final bartack, "wiper" thread flinger (W) and reverse stitch microswitch (B), other functions of the CP-180 panel. The machine has no oil sump, subclass S - with a small amount of oil in a closed circuit, supplied only to the hook and needle bar.

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL

JUKI DLM5400N (H) Chainstitch Machine

JUKI DLM5400N (H) 7/WB/AK85/SC920/CP180 It is a 1-needle lockstitch machine with serger-needle transport. Sewing speed of the machine up to 5000 stitches/min, stitch length up to 4 mm. Designed for sewing so-called "difficult" materials, which are exposed to shifting layers and for multi-layer sewing of heavier materials. The machine has central lubrication. Depending on the subclass: S - for sewing light and medium materials (standard), H - for heavy materials (4000 stitches/min, stitch length 4.5 mm).

Machine assembled, complete with warranty from the manufacturer.

Tops and base of the highest quality brand Kessler !!!

If you need parts for your machine, please visit CZESCIZIELINSKI.PL